Product SKU: 177389 ID: 09-p1683x2_sdsk2x2. (4) Rockford Fosgate Punch P1683 + Free NVX Sound Deadening. Rockford 130W RMS 6" x 8" Coaxial Speakers + NVX (2)SDKS2. 260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers Quantity: 2.
6" x 8" Punch Series 3-way Full Range Speakers. Peak: 260 watts per pair / 130 watts each.RMS: 130 watts per pair / 65 watts each. Recommended power range: 10 - 70 watts RMS per channel. Injection molded mineral filled polypropylene cone. 0.75 PEI Dome tweeter.
Recessed tweeter mount uses standard 1-3/4 hole. Frequency Response: 65 - 24,000 Hz. NVX SDSK2 - 90mil 2.3mm THICK.
Speaker Kit - 1.38 Square Feet of Sound Damping (Sound Deadening) Material (Two 10" x 10" Pieces) Quantity: 2. Two 10" x 10" Pieces of Sound Dampening Material.90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well. Great sound damping for installing with car door speakers.
1.38 Square feet total. Made from 100% Butyl Rubber. Increases sound quality and output of car audio system. Easy to form aluminum conforms to desired area of vehicle with ease.
Four step peel and stick design for easy installation. Up to 30% thicker than the leading competitors. Dimensions (each piece): 10" L x 10" W.How to Install Sound Damping Properly. Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. S important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results. The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicleâ??
S service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips. Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged.
If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface.
Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space. For this step, measure the prospective surface you are going to treat.To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands. Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles.
Use a rolling tool like the NVX SDRLR1. To press the mat down to the metal surface.Go across the entire surface with the roller to ensure that the sheet is installed properly. Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations. 6" x 8" (also mounts in most 5" x 7" locations). 65 - 24,000 Hz.
What is in the box? Speakers (2) Mounting screws (8) Mounting clips (8).
Add a Six Function Digital Multimeter. Features easy-to-read 2 Digital display.
(Cannot combine with other products). Upgrade your factory speaker wire to aftermarket speaker wire and hear the difference! Using thicker gauges, newer technology, and higher quality materials, aftermarket speaker wire is key to upgrading the sound in your car. Of True Spec 12 Gauge Speaker Wire.
100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions. 100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation. Get all of the tools and accessories to install your new speakers like a professional, or take your car to an expert and have them installed by redeeming professional installation cards. Car Stereo and Speaker Installation Tool Kit. Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.
Belva Five Piece Installer's Panel Removal Tool Kit. Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems. NVX SDRLR1 Sound Dampening Rubber Roller. Install your Sound Dampening with ease using this heavy duty rubber roller!NVX XTGSP2 Tone Generator and Speaker Polarity Tester. Perfect for safely troubleshooting and testing audio systems.
The perfect installation kit made for professional installers and DIYers. Belva Nine Function Digital Multimeter. Perfect for any installation and troubleshooting. Encore Universal Four Door Power Door Lock Kit.
Add Power Door Locking and Unlocking while you have the Door Panels removed. Get optimal sound from your new speakers with some high quality sound dampening material.
It will keep the road noise out and the music inside the car. Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks! Dynamat Xtreme Door Kit 10435.Enough sound dampening to cover most doors! Use this to eliminate rattle from your doors! Speaker Baffles, Spacers, and Depth Extenders. Mount your speakers in the location that you need with these speaker spacers, extenders, and adapters. Roadkill 5"x7" and 6"x8" Fast Rings.
Creates a tight seal around the speaker for enhanced audio quality and imaging. You need some kind of connectors to hook up your speakers to your wiring and lucky you, we've got them all! These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers. 12-10 AWG Quick Disconnect Connectors.
These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers! Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse.Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.
10645 Freeport Drive, Louisville, KY 40258 USA. Prices, specifications, and images are subject to change without notice.