Polk Audio DB572 150W RMS 5x7 Car Audio Coaxial Speakers + Sound Dampening Kit

Product SKU: 148393 ID: db572_sdbsk2. Polk Audio DB572 5x7 Speakers With Sound Dampening Kit. 450W Peak (150W RMS) 5" x 7" / 6" x 8" 2-way Marine Coaxial Speakers with Sound Dampening. 450W Peak (150W RMS) 5"x7" DB+ Series 2-way Car & Marine Coaxial Speakers Quantity: 1. 5" x 7" (also mounts in most 6" x 8" locations) Polk DB+ Series 2-way Coaxial Car Speakers. Peak: 450 watts per pair / 225 watts each. RMS: 150 watts per pair / 75 watts each.

Cutout Dimensions: 4.92 x 7.15. Frequency Response: 35 - 22000 Hz. NVX SDSK2 - 90mil 2.3mm THICK. Speaker Kit - 1.38 Square Feet of Sound Damping (Sound Deadening) Material (Two 10" x 10" Pieces) Quantity: 1.

Two 10" x 10" Pieces of Sound Dampening Material. 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well. Great sound damping for installing with car door speakers.

1.38 Square feet total. Made from 100% Butyl Rubber. Increases sound quality and output of car audio system. Easy to form aluminum conforms to desired area of vehicle with ease.

Four step peel and stick design for easy installation. Up to 30% thicker than the leading competitors. Dimensions (each piece): 10" L x 10" W. 5" x 7" (also mounts in most 6" x 8" locations). 4.92 x 7.15. What is in the box? Mounting Brackets/Hardware Speakers (2) Mounting screws (8) Mounting clips (8) Speaker connection cables (2). Mount your speakers in the location that you need with these speaker spacers, extenders, and adapters. Roadkill 5"x7" and 6"x8" Fast Rings. Creates a tight seal around the speaker for enhanced audio quality and imaging. Black Handle Stainless Steel Utility Knife.

NVX Black Handle Stainless Steel Utility Knife. Get optimal sound from your new speakers with some high quality sound dampening material. It will keep the road noise out and the music inside the car. NVX SDBSK2 1.38 Square Feet Damping Kit. Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks! NVX SDSK2 1.38 Square Feet Damping Kit.

Enough sound dampening for 2 speakers! Use this to eliminate rattle from your doors! Maximize your vehicle's audio quality by soundproofing your door panels, hood, trunk, and more using sound-damping insulation materials. A roller makes installing sound-damping material easier, quicker, and with more significant application. NVX SDRLR1 Sound Damping Rubber Roller.

Universal Professional Heavy Duty Roller for Sound Damping. NVX SDRLR2 Sound Damping Rubber Roller. Upgrade your factory speaker wire to aftermarket speaker wire and hear the difference!

Using thicker gauges, newer technology, and higher quality materials, aftermarket speaker wire is key to upgrading the sound in your car. Of True Spec 12 Gauge Speaker Wire. 100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound. 100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality. Make your job easier when it comes to pulling off those interior pieces, and it also keeps you from marring your finish.

Belva BTK106 Trim Panel Remover. Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers. Belva BTK105 Trim Panel Remover.

Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers. Get all of the tools and accessories to install your new speakers like a professional, or take your car to an expert and have them installed by redeeming professional installation cards.

Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging.

Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Prices, specifications, and images are subject to change without notice.